D330x500 Specifications
Drill Unit
- Width: 100” (254 cm)
- Height: 134” (340 cm)
- Weight w/o drill rod: 90,000 lbs (40,823 kg)
- Length: 53.3’ (16.25 m)
Operational
- Max spindle torque:
@ 44 rpm: 50,000 ft-lb (67,800 Nm)
@ 59 rpm: 37,500 ft-lb (50,800 Nm)
@ 88 rpm: 25,000 ft-lb (33,900 Nm) - Max spindle speed: 88 rpm
- Thrust (actual): 330,000 lb (149,685 kg)
- Pullback (actual): 330,000 lb (149,685 kg)
- Min bore diameter: 6.5” (17 cm)
- Max ground drive speed: 3 mph (4.8 km/h)
- Max carriage speed: 56 ft/min (17m/min)
- Drill rack angle: 13 – 30°
- Remote Lockout: Yes
Drilling Fluid System
- Utilizes an auxillary stand-alone fluid system
Features
- Breakout system
- Drilling Lights
- Flow Indicator
- BP600 display with built in diagnostic tool
- Stakedown System – Pad mount
- Cab: Integrated 2-person all climate
Power
- Engine: Caterpillar C-15 TIER III
- Gross power rating: 540 hp (403 kW)
- Net power rating: 486 hp (363 kW)
- Rated rpm: 2100 rpm
Drill Stem
- Type: Standard oil field
- Length: Up to 32 ft (9.8 m)
- Pipe diameter: 4.5” – 6” (11.4 – 15.2)
Fluid Capacities
- Fuel tank: 210 gal (795 L)
- Hydraulic Reservoir: 200 gal (757 L)
D130x150S NAVIGATOR
GENERAL WEIGHTS AND DIMENSIONS
- Length: 9.92 m (32.5′)
- Width: 2.49 m (8.2′)
- Height (basic unit): 3.28 m (10.8′)
- Weight (basic unit): 20,600 (45,330 lb)
- Weight (with drill rod, rod loader): 21,900 (48,300 lb)
ENGINE OPTION ONE – TIER 1
- Make and model: Donfeng Cummins 6CTA8.3 – C240
- Manufacturer’s rated power: 179 kW (240 hp)
- Rated rpm: 2200
ENGINE OPTION TWO – TIER 3
- Make and model: Donfeng Cummins QSB6.7 – C260
- Manufacturer’s rated power: 193.8 kW (260 hp)
- Rated rpm: 2200
OPERATIONAL
- Max thrust/pullback in low speed: 59,000 kg (130,000 lb)
- Max thrust/pullback in high speed: 24,300 kg (53,600 lb)
- Max rotational torque in low speed: 20,337 Nm (15,000 ft-lb)
- Max rotational torque in medium speed: 10,210 Nm (7500 ft-lb)
- Max rotational torque in high speed: 6807 Nm (5000 ft-lb)
- Max rotation speed (low): 45 rpm
- Max rotation speed (medium): 65 rpm
- Max rotation speed (high): 95 rpm
- Max ground drive speed: 6 km/h (3.7 mph)
OPTIONAL CRANE
- Max lifting capacity: 3200 kg (7054 lb)
- Max lifting capacity at max reach: 700 kg at 6.3 m (1500 lb at 20.7′)
- Max reach: 6.3 m (20.7′)
- Rotation: 360 degrees
- Type: V-Rod®
- Length: 6.1 m (20′)
- Diameter: 8.9 cm (3.5″)
- Max entry angle: 20 degrees
DRILLING FLUID SYSTEM
- Max pressure: 83 bar (1200 psi)
- Max flow: 757 L/min (200 gpm)
FLUID CAPACITIES
- Hydraulic tank: 416 L (110 gal)
- Fuel tank: 284 L (75 gal)
FEATURES
- Breakout system (vise): Standard
- Drilling lights: Standard
- Rod loader: Standard
- Stakedown system: Optional
- Electric Strike Alert: Standard
- Remote Lockout: Standard
- Mud flow status: Standard
- Cab: Standard
JT4020 Mach 1-Directional Drill
Equal parts brains and brawn, the Ditch Witch JT4020 Mach 1 directional drill can’t wait to tackle your big drilling jobs. Utilizing specialized, 15-ft (4.5 m) Ditch Witch drill pipe, the rubber-tracked JT4020 Mach 1 has the power and stability to pull multiple conduits up to 1000 feet (305 m) in a single utility installation—assisted by an exclusive cruise control feature that maintains thrust and rotation settings.
- 40,000 lb of pullback force, 240 RPM max. spindle speed.
- With the JT4020 directional drill’s field-proven, heavy-duty rack-and-pinion thrust drive with welded-on double rack, you’ll spend more time drilling and less time on drill maintenance.
- Equipped with a 190-hp (142 kW) diesel engine, the JT4020 drill rig has the power to drive all drilling functions simultaneously—and drive your productivity way up.
- You can secure the Ditch Witch JT4020 in all types of ground conditions thanks to its innovative hydraulic, four-point anchor system.
D100x120 Series II.
Equipped with a 225 hp/150 kW John Deere 6068 Tier 3 diesel engine, the D100x120 Series II offers 12,000 ft-lb./16,270 Nm of rotational torque and 100,000 lbs/445 kN of thrust/pullback force.
- Improves productivity through a climate-controlled cab that features 360° visibility, a state-of-the-art operator’s station and fingertip controls on the electronic joysticks.
- Reduces maintenance time with a self-cleaning rack-and-pinion carriage drive and bolt-on gear rack sections.
- Change rod boxes easier when you add the optional remote-controlled crane that eliminates the need for an excavator or backhoe and delivers a lift capacity of 7,530 lbs/3,416 kg and maximum reach of over 20 feet/6 m.
- Helps prevent rod wrap or wind-up because its floating vice allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
- Superior Firestick drill stem constructed of Vermeer-specified high carbon alloy steel features one-piece, forged rods that have been heat-treated for uniform strength and consistent quality.
| Make and Model | John Deere PowerTech PE6068HF275 | Value |
|---|---|---|
| Fuel Type | Diesel | |
| Maximum Engine RPM | 2400 rpm | |
| Idle Speed | 800 rpm | |
| Rated RPM | 2400 rpm | |
| Gross Horsepower | 225 hp | 167.8 kw |
| Net Horsepower | 203 hp | 151.4 kw |
| Torque (Maximum) | 756 ft-lb | 1025 Nm |
| Displacement | 415 cu-in | 6.8 L |
| Number of Cylinders | 6 | |
| Cooling Method | CAC air to air | |
| Aspiration | Turbocharged | |
| Max Fuel Consumption | 13.7 gph | 51.9 lph |
| Air Cleaner | Donaldson | |
| RadialSeal | FRG130097 | |
| EPA Certification Family | Tier 3 | |
| Maximum Operating Angle (Fore/Aft)* | 25 continuous | |
| Maximum Operating Angle (Left/Right)* | 25 continuous |
Model 42 "Thruster Buster" Maximum Diversity
The Model 42 Thruster Buster horizontal earth boring machine with 97 hp Deutz diesel is packaged to provide extra power for the extra-rugged boring applications 12″ to 42″ in diameter. If you want to take the tough jobs along with the easy ones, this special boring unit is the answer to ALL your needs. Includes automatic push bar and winch. Optional Equipment: Extra track, heads, augers, all size hexes and casing attachments
| Model 42 Specifications | |
|---|---|
| Engine | Deutz Diesel |
| HP Rating | 97 HP |
| Max Rated Speed | 2,300 RPM |
| Transmission | T-18 4 Speed |
| Hydraulic Thrust (intermittent) | 603,187 lbs. |
| Thrust Cylinders | (Two) 8" Bore x 60" Stroke |
| Hex Drive | 4" Hex |
| Length | 125" |
| Width | 60" |
| Height | 61" |
| Centerline | 31-1/2" |
| Master Track Length | 144" |
| Extension Track Length | 120" |
| Machine Weight | 7,470 lbs. |
| Cylinder Package | 4,150 lbs. |
| Master Pusher | 1,380 lbs. |
| Master Track | 2,660 lbs. |
| Extension Track (each) | 2,060 lbs. |
Hydraulic -Centreline- Thrust Boring Casing machines, 305mm (12") and 610mm (24") Diameter.
Operate via. Briteli Remote Hydraulic Power Pacs, any suitable Skid Steer, Backhoe or Excavator. -Centreline- design and Bearing-Roller mounted carriages ensure no loss of Thrust efficiency. Briteli Quick Retract System saves valuable time during operations. Personnel safety and comfort is ensured using a Hydraulic Power source placed well outside the operating station. These unique machines offer a PVC/PE Direct Burial System.
| Basic Specifications: | C/Line 300 | C/Line 600 |
|---|---|---|
| Bore Diameter range mm: | 150-310 | 200-610 |
| Max.Thrust kg: | 11400 | 48000 |
| *Max Thrust kg: | 22800 Bore centre height mm: 350 550 | N/A |
| Rotary Torque nm: | 2000 | 7700 |
| * Rotary Torque nm: | 3600 | N/A |
| Bore lengths metre at max.Dia. | 30 | 40 |
| * Bore lengths metre at max. Dia. | N/A | |
| Hyd Power pac HP Hyd. | 40 | 64 |
| Power Pac oil flow lpm: | 70 | 120 |
| Bar Pressure: | 175 | 175 |
| Machine track length mm: | 1550 | 3000 |
| Extension track length mm: | 3000 | 3000 |
| Width mm: | 1100 | 1400 |
| Bore centre height mm: | 350 | 550 |